 |
| The
CT-516 is a complete assembly that includes the CT-516
plate and tie plus a mechanical fastener capable of being
applied to concrete and/or masonry structures. |
 |
Torque
Activated: 50 – 100 in – lb • Hex Head
Finish – Low Profile • Bolt Head Provides
Inspection Source
Low Profile Avoids Insulation or Tie Interference •
Zinc Plated or Stainless Bolt with Brass Expanders •
Fastener Preload > Four Times Design Load |
 |
|
1) Drill 3/8” diameter
hole in base material 1-1/2” – 2” deep
2) Blow out drill fines
3) Assemble fastener to the CT-16 Base plate center hole
4) Slip assembly into drilled hole until plate bottoms
to base material
5) Tighten fastener, 50 – 100 IN-LB |
|
| |
|
