ACI
530.1/ASCE6/TMS - specifications for Masonry Structures
B.
American
Society for Testing and Materials (ASTM) B 16, Type 360 Brass
- Standard Specification for Free-Cutting Brass Rod, Bar and
Shapes for use in Screw Machines
1.4
SUBMITTALS
A.
Submit
under provisions of Section 01300
B.
Torque-Tie:
manufactures data sheets on each product to be used, inculding:
1.
Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods
1.5
DELIVERY,
STORAGE AND HANDLING
A.
Store
products in manufacture's unopened packaging until ready for
installation.
PART
2 PRODUCTS
2.1
MANUFACTURER
A.
Acceptable
Manufacturer:
Construction Tie Products, Inc. (CTP, Inc.)
Michigan City, IN 46360-9390 USA.
Tel. 219-878-1427 Fax: 219-874-3626
salesctp@comcast.net
2.2
PRODUCTS
A.
Masonry
Repair and Restoration Re-Anchoring Exsisting Veneers (Selection
based on application):
a.
5300 Series Torque-Tie Mechanical Repair Anchor
PART
3 EXECUTION
3.1
PREPARATION
A.
Locate
anchors in the area to be anchored per project drawings and
details.
3.2
INSTALLATION
A.
Select
proper anchor lenght by field verification
B.
Drill
proper hole size per anchor type and blow out drill fines.
C.
Using
appropriate setting tool and adapters, tighten back-up anchor
to recommended torque range, then tighten facade portion to
the recommended torque range.
